- There are no more items in your cart
- Shipping
- Total €0.00
- ELECTRONICS
- ELECTRICITY
- SAIL & MANEUVER
- HARKEN
- SPINLOCK
- RONSTAN
- OPTIPARTS
- TYLASKA
- MANTENIMIENTO
- ANCHORING & MOORING
- SAFETY
46.2STA Radial aluminum
- Self-tailing
- 2 speed
- Minimum line: 8mm
- Maximum line: 14mm
- Base: 184mm
- Height: 201mm
- Durm: 100mm
- Weight: 5.2kg
RADIAL LINE WINCHES
Harken Radial Line winches have successfully balanced the need for a secure grip and line longevity with smooth, controlled easing while under load. Details sailors will appreciate: smaller winches that carry higher loads, stress-free seasonal maintenance, and one-person installation with easy upgrades to power. Nine sizes in multiple styles and finishes: aluminum, chrome, and bronze; 1-, 2-, and 3-speed self-tailing; manual, electric, or hydraulic drives.
Maximum holding power with minimum line wear
- Nonabrasive diagonal ribs on gripping surface hold line securely and reduce line wear; ribs shaped for each winch size and drum material.
Smooth, controlled easing
- Patented angle of ribs drives line wraps down when easing to keep them on area of drum that provides best control.
High-strength, lightweight
- Weight savings of 25 to 50 percent compared to Harken Classic winch line.
- High-strength composite roller bearings and bushings reduce friction under load.
- Load-carrying gears and pins are 17-4 PH stainless steel for strength, corrosion resistance.
Adjustable stripper arm integrated into winch top for safer operation
- Stripper arm completely covers rotating winch top, preventing fingers and clothing from catching in moving parts.
- Adjusts to multiple positions after the winch is mounted to optimize line exit.
- Shaped to smoothly feed line in and out of self-tailing jaws.
Power-grip jaws shaped for easy line entry, optimum hold
- Upper jaw adjusts under line pressure; accepts a variety of line sizes.
- Teeth grip evenly with or without load.
Simple to install, easy maintenance
- Patented mounting system for fast, one-person installation without removing drum.
- Snap off the skirt at the base of the winch.
- Slide bolts through the slots in the winch base and snap the plastic skirt back on.
- Place the stud bolts into the predrilled holes on the deck and tighten from belowdeck.
- Snap-fit design keeps bearings captive when drum is removed for maintenance.
- Easy to disassemble for service on deck; socket, washer, and screw-top snap-fit together for mistake-free reassembly.
- Composite roller bearings don’t require lubrication.
PART NO. | DRUM (T) | BASE (B) | HEIGHT (A) | WEIGHT | LINE ENTRY HEIGHT (AEL) | LINE MIN/MAX) | FASTENER CIRCLE | GEAR RATIO 1/2/3 | POWER RATIO 1/2/3 |
46.2STA | 100mm | 184mm | 201mm | 5.2kg | 90mm | 8mm / 14mm | 150mm | 2.30/9.17/xxx | 11.70/46.50/xxx |
Reference: HAR_50.2STA
Brand: HARKEN IT
50.2STA Radial aluminum
Self-tailing 2 speed Minimum line: 8mm Maximum line: 14mm Base: 194mm Height: 212mm Durm: 110mm Weight: 6kg
Reference: HAR_40.2STA
Brand: HARKEN IT
40.2STA Radial aluminum
Self-tailing 2 speed Minimum line: 8mm Maximum line: 12mm Base: 157mm Height: 175mm Durm: 80mm Weight: 3.8kg
Reference: HAR_60.2STA
Brand: HARKEN IT
60.2STA Radial aluminum
Self-tailing 2 speed Minimum line: 8mm Maximum line: 16mm Base: 236mm Height: 246mm Durm: 120mm Weight: 10.2kg
Reference: HAR_60.3STA
Brand: HARKEN IT
60.3STA Radial aluminum
Self-tailing 3 speed Minimum line: 8mm Maximum line: 16mm Base: 236mm Height: 246mm Durm: 120mm Weight: 11.7kg
Reference: HAR_35.2STA
Brand: HARKEN IT
35.2STA Radial aluminum
Self-tailing 2 speed Minimum line: 8mm Maximum line: 12mm Base: 149mm Height: 170mm Durm: 80mm Weight: 3.6kg