Reference: BPC122531064
Brand: VICTRON ENERGY
copy of Charger Blue Smart IP65 - 12V/15A
- VICTRON ENERGY - 12V CHARGER - CHARGE CURRENT 25A - SEALING IP65 - 1 CHARGE OUTPUT - BLUETOOTH
Banner
- VICTRON ENERGY
- 12V CHARGER
- CHARGE CURRENT 10A
- SEALING IP65
- 1 CHARGE OUTPUT
- BLUETOOTH
With up to 95% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
- Low thermal stress on the electronic components.
- Protection against ingress of dust, water and chemicals.
- Protection against overheating: the output current will reduce as temperature increases up to 60°C, but the charger will not fail.
- The chargers are totally silent: no cooling fan or any other moving parts.
A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.
Most reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. The Blue Smart IP65 Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.
Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.
The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Smart IP65 Charger measures ambient temperature during the test phase and compensates for temperature during the charge process. The temperature is measured again when the charger is in low current mode during float or storage. Special settings for a cold or hot environment are therefore not needed.
The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO₄) batteries, with automatic Li-ion under voltage protection reset.

Reference: BPC122531064
Brand: VICTRON ENERGY
- VICTRON ENERGY - 12V CHARGER - CHARGE CURRENT 25A - SEALING IP65 - 1 CHARGE OUTPUT - BLUETOOTH
Reference: BPC121542002
Brand: VICTRON ENERGY
- VICTRON ENERGY - 12V CHARGER - CHARGE CURRENT 15A - 1 CHARGE OUTPUT - BLUETOOTH
Reference: BPC123044002
Brand: VICTRON ENERGY
- VICTRON ENERGY - 12V CHARGER - CHARGE CURRENT 30A - 3 CHARGE OUTPUTS - BLUETOOTH
Reference: AZ_43510400
Brand: MASTERVOLT
Output 6V / 12V Only 1 output 4.3A Waterproof IP65
Reference: AZ_44311005
Brand: MASTERVOLT
12 volts 100 amps 3 outputs
Reference: PSC125053095
Brand: VICTRON ENERGY
- VICTRON ENERGY - 12V CHARGER - CHARGE CURRENT 50A - SEALING IP43 - 3 OUTPUTS - BLUETOOTH
Reference: BPC121544002
Brand: VICTRON ENERGY
- VICTRON ENERGY - 12V CHARGER - CHARGE CURRENT 15A - 3 CHARGE OUTPUTS - BLUETOOTH
Reference: PSC123051095
Brand: VICTRON ENERGY
- VICTRON ENERGY - 12V CHARGER - CHARGE CURRENT 30A - SEALING IP43 - 1 + 1(3A) OUTPUTS - BLUETOOTH
Reference: BPC121531064
Brand: VICTRON ENERGY
- VICTRON ENERGY - 12V CHARGER - CHARGE CURRENT 15A - SEALING IP65 - 1 CHARGE OUTPUT - BLUETOOTH
Reference: BPC122042002
Brand: VICTRON ENERGY
- VICTRON ENERGY - 12V CHARGER - CHARGE CURRENT 20A - 1 CHARGE OUTPUT - BLUETOOTH
Reference: PSC125051095
Brand: VICTRON ENERGY
- VICTRON ENERGY - 12V CHARGER - CHARGE CURRENT 50A - SEALING IP43 - 1 + 1(3A) OUTPUTS - BLUETOOTH
- VICTRON ENERGY
- 12V CHARGER
- CHARGE CURRENT 10A
- SEALING IP65
- 1 CHARGE OUTPUT
- BLUETOOTH